Industry News
-
Key points to consider when assembling a mold
The mold assembly is a critical step in the mold manufacturing process. It is the process of putting together all of the mold parts to create a complete mold. The quality of the mold assembly will directly affect the performance and service life of the mold.
07-12-2023 -
Injection Mold Lift Mechanism
An injection mold lift mechanism is a device used to eject plastic parts from an injection mold. It is a critical component of the injection molding process, as it ensures that the plastic parts are ejected cleanly and without damage.
05-12-2023 -
Some design mistakes for injection molding
Injection molding is a complex process, and one mistake can cause cosmetic flaws, compromise product integrity, and lead to expensive redesigns.
30-11-2023 -
What is the Gas Assisted Injection Molding (GAIM)?
Gas assisted injection molding (GAIM) is a manufacturing process that uses pressurized gas to create hollow plastic parts.
28-11-2023 -
How to control the injection molding temperature?
There are two main ways to control the injection molding temperature: barrel temperature control and mold temperature control.
21-11-2023 -
Overmolding products in our daily life
Overmolding is a manufacturing process that combines two or more plastics or metals to create a single part. The first plastic or metal is typically a structural material, such as ABS or nylon. The second plastic generally is a decorative or functional material, such as rubber or silicone.
16-11-2023 -
Standard parts of mold gating system
A mold gating system is a network of channels that deliver molten plastic from the injection molding machine nozzle to the mold cavity. It is an important part of the injection molding process, as it affects the quality and efficiency of the molded parts.
14-11-2023 -
What you need to know about injection mold making equipment?
The equipment needed in injection mold making can be divided into two main categories: basic equipment and Auxiliary equipment.
09-11-2023 -
How to set the injection molding pressure?
Injection pressure is the pressure at which the molten plastic is injected in to a mold cavity. It is typically measured in tons per square inch(psi) or megapascals (MPa)
07-11-2023 -
The function of UV paint on plastic
UV paint is a type of paint that cures or hardens when exposed to ultraviolet light. This type of paint is often used on plastic products, as it provides a durable and long-lasting finish that is resistant to fading, chipping.
02-11-2023