News

As the 2025 Spring Festival approaches, and in consideration of our company’s operational arrangements, we have scheduled a holiday break from January 28, 2025, to February 4, 2025, totaling 8 days. Normal operations will resume on February 5, 2025.

ArabPlast, which will be held at the Dubai World Trade Centre from 13 to 15 December 2023, is the leading trade fair for plastics, rubber, petrochemicals and packaging in the MENA region.

The holiday period: 21 January (Saturday) to 27 January (Friday), a total of 7 days

Quality management system is a high-standard international quality management system.

According to the government’s work instruction for resuming work and production, Shanghai Future Mould has officially resumed wok from June 1.

The gate is the passage that connects the runner and the cavity in an injection mold. Its location and form significantly affect the quality of the molded part, production efficiency, and mold life. A reasonable gate layout ensures smooth filling of the cavity with the melt, reduces defects, and improves product quality.

The draft angle in injection-molded products refers to the inclined angle between the product

During the injection molding process, after the molten plastic is injected into the mold cavity under high pressure and solidified, the cooled product must be separated from the mold using an ejection mechanism. The primary goal of ejection mechanism design is to ensure that the product is safely and completely ejected from the mold surface with minimal force and uniform stress distribution once it has fully cooled or achieved sufficient strength.

In multi-cavity mold design, runner balance directly impacts filling uniformity across cavities and the consistency of product quality.

The inspection and acceptance of injection mold bases are critical steps before mold assembly and manufacturing, directly impacting mold precision, service life, and production stability. Hidden defects or dimensional deviations in the mold base can lead to issues such as difficult mold clamping, ejection jamming, or even product scrap during mass production.

In the injection mold manufacturing process, the surface finish of the mold directly impacts the appearance quality of molded products and subsequent processing.