Industry News
-
How to solve the difficulty of demolding?
In the injection molding process, there are three main reasons for the difficulty of demolding: 1. complicate product structure; 2. Insufficient draft angle; 3. Poor surface treatment.
13-01-2022 -
What are the reasons for causing color differences of injection enclosure products?
For injection enclosure products, the appearance is the most important part for the customers, and it is not allowed to have defects such as color differences.
11-01-2022 -
What are the designs of ribs in plastic products?
The reinforced rib is one of the indispensable functional parts of plastic products, and it has obvious effects on strengthening product structure and improving the injecting effect.
04-01-2022 -
Cavity number setting of injection mold
The injection molds worked as a mechanical tool for the production of plastic products, which has an important situation in the plastic industry.
30-12-2021 -
What should be noticed in POM mold processing?
POM, normally known as polyoxymethylene, is a high-density polymer with good physical, mechanical and chemical properties.
28-12-2021 -
What are the basic methods to solve the shrinkage defect of flat plastic parts?
The deformation of big flat products has always been one of the problems in the injection molding industry.
21-12-2021 -
Brief introduction of PPSU material
PPSU, scientific name: polyphenylene sulfone resins, is an amber thermal engineering plastic with high transparency and high hydrolytic stability.
16-12-2021 -
Brief introduction of the function of vacuum casting mold
Vacuum casting mold is a simple technology that to use product prototypes to make silicone molds in a vacuum environment, and use ABS, polyurethane, and other material
14-12-2021 -
How to solve the shrinkage problem of thick-walled plastic parts?
The shrinkage of plastic products is caused by insufficient feeding of melted plastic when the thicker parts of the product are cooling.
07-12-2021