Gas assisted injection molding (GAIM) is a manufacturing process that uses pressurized gas to create hollow plastic parts.

ArabPlast, which will be held at the Dubai World Trade Centre from 13 to 15 December 2023, is the leading trade fair for plastics, rubber, petrochemicals and packaging in the MENA region.

There are two main ways to control the injection molding temperature: barrel temperature control and mold temperature control.

The equipment needed in injection mold making can be divided into two main categories: basic equipment and Auxiliary equipment.

Injection pressure is the pressure at which the molten plastic is injected in to a mold cavity. It is typically measured in tons per square inch(psi) or megapascals (MPa)

A draft angle is the angle applied to the vertical wall of an injection molded parts to assist with releasing the part from the mold.

A plastic injection molding machine is a manufacturing machine designed to turn plastic polymers and resins into plastic parts and products. The injection molding process will essentially heat plastic material to its melting point, and the injection unit will force it into a created mold. Once in the mold, the part or product will harden as it cools, and the solid product will be ejected.

How to set the ejector pin?

The production cycle of an injection mold project is generally 40 days, and the communication between the supplier and the customers in the beginning directly determines the progress of the project. The following are some details of the mold project. If this data is fully provided, it will save lots of time on information exchange.

Some preparation before injection molding