The mold assembly is a critical step in the mold manufacturing process. It is the process of putting together all of the mold parts to create a complete mold. The quality of the mold assembly will directly affect the performance and service life of the mold.

An injection mold lift mechanism is a device used to eject plastic parts from an injection mold. It is a critical component of the injection molding process, as it ensures that the plastic parts are ejected cleanly and without damage.

Injection molding is a complex process, and one mistake can cause cosmetic flaws, compromise product integrity, and lead to expensive redesigns.

Gas assisted injection molding (GAIM) is a manufacturing process that uses pressurized gas to create hollow plastic parts.

ArabPlast, which will be held at the Dubai World Trade Centre from 13 to 15 December 2023, is the leading trade fair for plastics, rubber, petrochemicals and packaging in the MENA region.

There are two main ways to control the injection molding temperature: barrel temperature control and mold temperature control.

Overmolding is a manufacturing process that combines two or more plastics or metals to create a single part. The first plastic or metal is typically a structural material, such as ABS or nylon. The second plastic generally is a decorative or functional material, such as rubber or silicone.

A mold gating system is a network of channels that deliver molten plastic from the injection molding machine nozzle to the mold cavity. It is an important part of the injection molding process, as it affects the quality and efficiency of the molded parts.

The equipment needed in injection mold making can be divided into two main categories: basic equipment and Auxiliary equipment.

Injection pressure is the pressure at which the molten plastic is injected in to a mold cavity. It is typically measured in tons per square inch(psi) or megapascals (MPa)