To determine if an injection molding machine is leaking, you can follow these steps.

Keep good record of your T0 samples, this will help you to track the changes you make to the mold, the material and the process settings.

Injection molding is a complex process, and one mistake can cause cosmetic flaws, compromise product integrity, and lead to expensive redesigns.

Gas assisted injection molding (GAIM) is a manufacturing process that uses pressurized gas to create hollow plastic parts.

ArabPlast, which will be held at the Dubai World Trade Centre from 13 to 15 December 2023, is the leading trade fair for plastics, rubber, petrochemicals and packaging in the MENA region.

Overmolding is a manufacturing process that combines two or more plastics or metals to create a single part. The first plastic or metal is typically a structural material, such as ABS or nylon. The second plastic generally is a decorative or functional material, such as rubber or silicone.

Injection pressure is the pressure at which the molten plastic is injected in to a mold cavity. It is typically measured in tons per square inch(psi) or megapascals (MPa)

PEEK injection molding is a process of creating parts from PEEK (polyether ether ketone), a high-performance thermoplastic. PEEK is known for its strength, stiffness, chemical resistance, and biocompatibility, making it ideal for a wide range of applications, including medical devices, aerospace components, and industrial equipment.

A plastic injection molding machine is a manufacturing machine designed to turn plastic polymers and resins into plastic parts and products. The injection molding process will essentially heat plastic material to its melting point, and the injection unit will force it into a created mold. Once in the mold, the part or product will harden as it cools, and the solid product will be ejected.

Some preparation before injection molding